Yamaha FG-TA VTB TransAcoustic Guitar, Vintage Tint B-Stock
|
|
|
| Quantity: | |
|
|
|
Add to Cart | |
;){kind=link}
This guitar is a Yamaha B-Stock, with full fctory warranty. There are no functional or structural issues, only cosmetic. There's some minor marring on the back, and it's so minor the camera barely picks it up. See the final photo.
Actuator
An actuator installed on the inner surface of the guitar back resonates in response to the vibrations of the strings. The vibrations generated by the actuator are then transmitted to the body of the guitar and to the air in and around it, resulting in authentic reverb and chorus sounds that actually radiate from within the body.
Simple Controls
Three simple controls adjust the effects levels and line out volume level. The small knobs occupy less space, reducing the acoustic sound loss that results from removing body wood.
(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control
* Pressing the TA Switch for longer than 0.3 seconds activates the TA function.
* When a cable is connected to the Line Out jack, the volume can be adjusted by rotating knob (C).
* The reverb type switches from Room to Hall around the 12:00 position.
Battery Box
The battery box is integrated into the end-pin jack, requiring fewer holes in the body and thus reducing acoustic sound loss. Connect a cable from the jack to a PA or amp to use the TA instrument as an acoustic-electric guitar.